Your Harsh & Hazardous Area
Solutions Company

Sales and advice call or email +44 (0)1925 852745
Opening times: Mon - Thur 8am-5pm / Fri 8am - 3pm

  1. Trade Account
  2. Videos
  4. Contact
  5. News
  6. Basket
  7. Login
  8. Register
You are here
Analogue Signal Converters
Weidmuller ACT20M

ACT20M-AI-AO-S Weidmuller

Part Number: 1176000000

Availability: Enquire about stock

ACT20M, Signal converter/insulator, Screw connection

£134.50 excl. VAT

ACT20M-AI-AO-S Details

Configurable ACT20M AI-AO U/I DC converter/supply isolator and ACT20M-AI-2AO signal multiplier: with 6.1 mm width and external power supply for transmitting and isolating analogue DC current and voltage signals. The universal input and output parameters can be configured as required using the DIP switches. The input/output channel(s) and power supply have 2.5 kV of electrical isolation.

The universal ACT20M-AI-AO-S supply isolator can feed power directly from the input loop signal to passive sensors. ACT20M-AI-2AO-S with 4-way isolation is designed as a signal splitter. The input signal is doubled on the output side. It can be transmitted simultaneously to a controller and an external display.

High precision of < 0.05% of measurement range, wide temperature range of -25°C (0°C)...+70°C and international approvals (cULus, ATEX Zone2, FM Div2, GL, DNV) mean the device can be used in many applications around the world.

The power supply can be easily and quickly installed using the CH20M DIN rail bus. The power can be supplied using any ACT20M module (up to 20 devices) or a separate ACT20 supply module (up to 200 devices).

Accuracy< 0.05 % of measuring range
ConfigurationDIP switch
Galvanic isolation3-way isolator
Mounting railTS 35
Power consumption, max.1.2 W
Power consumption, typ.400 mW
Step response time≤ 7 ms
Supply voltage24 V DC ± 30 %
Temperature coefficient≤ 0.01 % / °C
Type of connectionScrew connection
Product TypeCurrent Analogue

Universal standard signal isolating amplifier1-channel signal isolating amplifier in 6.1 mm width with external power supply,

for transmitting and isolating analogue DC current signals 0/4 to 20 mA and voltage signals 

0/2 to 10 V // 0/1 to 5 V.

Add-on housing for TS35 rail mounting

Dimensions: L/W/H 114.3/ 6.1/ 112.5 mm

Screw connection / Nominal cross-section 2.5 mm2Protection degree: IP 20   

Input                         0/4...20 mA

                                      0/2...10 V or 0/1...10 V

Output                                             0/4...20 mA 

                                      0/2...10 V or 0/1...5 V

Load resistance             < 600 Ohm/ Strom/> 10 kOhm/ voltage

Transmission error             < 0,05 % v. E. 

Limit frequency 100 Hz

Auxiliary power                                     24 VDC +/- 30 %

Power loss approx. 0.8 W


temperature range -25 °C...+70 °C

Isolation                                 EN 61010-1, 3-way isolation up to 2.5 kV AC/DC of all circuits against each other

Test voltage                               2.5 kV input against output against auxiliary power


voltage                                          300 V AC/DC at overvoltage category II and pollution degree 2

Approvals cULus, FM Div2, ATEX Zone2, DNV, GL

Recently viewed

You are here
Analogue Signal Converters