Your Harsh & Hazardous Area
Solutions Company

Sales and advice call or email +44 (0)1925 852745
sales@cablesystems.co.uk
Opening times: Mon - Thur 8am-5pm / Fri 8am - 3pm

  1. Trade Account
  2. Videos
  3. Downloads
  4. Contact
  5. News
  6. Basket
  7. Login
  8. Register
You are here
Analogue Signal Converters
ACT20M-CI-2CO-S
Weidmuller ACT20M

ACT20M-CI-2CO-S Weidmuller

Part Number: 1175990000

Availability: 2 in stock

ACT20M, Signal converter/insulator, Screw connection

£156.53 excl. VAT

ACT20M-CI-2CO-S Details

The externally supplied ACT20M…, ACT20P… , MAS RPS/RPSH and WAS/WAZ 4/5 signal converters/ supply isolators for transmitting, isolating and converting standardised DC current signals are optionally available in widths of 6 mm (ACT20M…), 12.5 mm (WAS/WAZ4, ACT20P…) or 17.5 mm (WAS/WAZ5…).

The input and output circuits and the voltage supply are completely electrically isolated.

The input signal is converted into a DC current or voltage value.

WAVESERIES signal converters are optionally available with a limiting frequency of 10 Hz (WAS/ WAZ4) or 20 kHz (WAS/WAZ5) for fast signal processing.

The MAS/RPS/RPSH supply isolators can supply external 2-wire sensors (ACT20P 2-/3-wire sensors) and are optionally suitable for transmitting HART protocols (MASRPSH, ACT20P).

The 24 VDC supply voltage can be cross-connected on the module side via the CH20M BUS PROFILE (ACT20M series) or using the ZQV4N (MAS) or ZQV 2.5N (WAS/ WAZ) pluggable jumpers. International approvals such as ATEX zone 2, UL C1D2 and FM Div2 also enable use in explosive risk zones.

Accuracy< 0.05 % of measuring range
Configurationnone
Galvanic isolation3-way isolator
Mounting railTS 35
Power consumption, max.0.8 W
Power consumption, typ.400 mW
Step response time≤ 7 ms
Supply voltage24 V DC ± 30 %
Temperature coefficient≤ 0.01 % / °C
Type of connectionScrew connection
ManufacturerWeidmuller
Product TypeCurrent Analogue

Standard signal splitter

1-channel signal splitter in 6.1 mm width with external power supply,

to transmit, isolate and split analogue DC current signals 0/4...20 mA

Add-on housing for TS35 rail mounting

Dimensions: L/W/H 114.3/ 6.1/ 112.5 mm

Screw connection / Nominal cross-section 2.5 mm2Protection degree: IP 20   

Input                          0/4...20 mA

Output                                              2 x 0/4...20 mA 

Load resistance             < 300 Ohm/ Ausgang

Transmission error             < 0,05 % v. E. 

Limit frequency 100 Hz 

Auxiliary power                                     24 VDC +/- 30 %

Power loss approx. 0.8 W

Ambient 

temperature range -25 °C...+70 °C

Isolation                                 EN 61010-1, 3-way isolation up to 2.5 kV AC/DC of all circuits against each other

Test voltage                               2.5 kV input against output against auxiliary power

Rated 

voltage                                          300 V AC/DC at overvoltage category II and pollution degree 2

Approvals cULus, FM Div2, ATEX Zone2, DNV, GL

Recently viewed

You are here
Analogue Signal Converters
ACT20M-CI-2CO-S