Cable Systems hold extensive stocks of CEAG surface mounted control station components enabling us to rapidly supply bespoke builds to meet our customers’ requirements.
CEAG explosion-protected control units and control stations are available in enclosures made of thermoplastic, glass-fibre reinforced polyester, light alloy or stainless steel. The large variety of enclosure materials is already an indication of the numerous customized configuration possibilities, which are supplemented by a large selection of built-in components.
Easy connection of cables thanks to the snap on fixing method for control units. A further advantage is the low-cut enclosure walls, which allow easier access.
Even under the most adverse conditions, CEAG control stations can be used and operated reliably. The enclosures consist of low-temperature impact resistant thermoplastic, which fulfils the requirements of EN 60079 and provides a high resistance to chemicals. The well thought out design with low sidewalls allows optimum cable connection. Quick fixing allows up to three CEAG built-in components, such as signal lamps, pushbuttons and switches, to be snapped on a rail in the enclosure. They can be snapped out of the enclosure to facilitate cable-entry feeding. Notches in the mounting rails prevent the built-in components from being twisted out of place.
Typical Control Station combinations are shown below;-
Wall mounting can be carried out via easily accessible fixing apertures when the enclosure cover is sealed. CEAG mounting plates offer a timesaving fixing technique. CEAG control stations feature standard M25 moulded-plastic cable entries with an 8 to 17 mm clamping diameter. Coupling pieces link enclosures to each other and prevent them from being twisted out of place. Alternatively, metal screws and flanges can be used for mounting – the metal flanges also enable external earthing. Free mounting areas can be provided for retrofitting certified CEAG components. These are then factory sealed with blanking elements.