Speak to a team member +44 (0) 1925 852745
Home › Hazardous Area Products › Hazardous Area Sensors › Photocell Lighting Control › Eaton GHG CEAG 640 9601 P0004 Ex-Twilight Switch

Eaton GHG CEAG 640 9601 P0004 Ex-Twilight Switch

For use in Zones 1 and 2

  • Switching capacity up to 1800 VA
  • High degree of protection IP66
  • Easy to install
Product Code: GHG6409601P0004

£536.90 (excl. VAT)

Availability: 1 in stock (Available for next day delivery)

Share this product:

Ex-Twilight switch

For the comfortable and automatic control of lighting in hazardous areas.

This screw-in twilight switch has been approved for direct installation in Ex-d and Ex-e enclosures.

The electronics and the light-sensitive sensor are encapsulated in a flameproof light alloy enclosure with a M32 x 1.5 threaded connection. The encapsulated connection cables are 500 mm long.

The photocell has an electronic circuit with a low power consumption of less than 1 W and a voltage range of 100 V AC to 260 V AC 50/60Hz and switches a rated current of 10 A or a max. power of up to 1800 VA.

The electronics switch on immediately if the light falls below the threshold values. However, there is a 2 to 5 second switching-off delay to avoid accidental switching due to light flashes.

Technical data
Photocells GHG 640 9601 P000x
Marking accd. to 2014/34/EU D II 2 G Ex db IIC T6 Gb
EC-Type Examination Certificate Sira 17 ATEX 1219 X
IECEx Certificate of conformity IECEx CSA 17.0016 X
Marking accd. to IECEx Ex db IIC T6 Gb
Permissible ambient temperature -40 °C up to +70 °C
Rated voltage 100 V to 260 V AC
Rated current max. 10 A
Frequency 50 – 60 Hz
Power consumption <1 W
Rated switching capacity 1800 VA
Standard cable length approx. 0.5 m, 3 x 1.5 mm2
Protection class I
Degree of protection accd. to EN 60529 IP66
Weight 0.25 kg
Type of mounting screw in thread M32 x 1.5
Enclosure material aluminium
Enclosure colour grey

Download GHG 640 9601 P0004 Datasheet

Product Enquiry

  • This field is for validation purposes and should be left unchanged.