Speak to a team member +44 (0) 1925 852745
Home › Hazardous Area Products › Heaters & Thermostats › Air Warmers › EXHEAT FWD Flameproof Air Warmers

EXHEAT FWD Flameproof Air Warmers

The FWD range of air warmers is designed for use in small work or storage areas, and are certified for use in hazardous areas where the atmosphere is classified as a Zone 1 or 2 (IIA, IIB, IIC) gas group, or a Zone 21 or 22 (IIIA, IIIB, IIIC) dust group.

Can be back ordered

Please enter a quantity

Share this product:

The FWD range of air warmers is designed for use in small work or storage areas, and are certified for use in hazardous areas where the atmosphere is classified as a Zone 1 or 2 (IIA, IIB, IIC) gas group, or a Zone 21 or 22 (IIIA, IIIB, IIIC) dust group.

Features

  • Certified to ATEX and IECEx standards
  • Fabricated carbon steel enclosure weatherproof to IP66
  • Temperature classes T2, T3 and T4 available
  • Suitable for floor or wall mounting
  • 2 × 20mm (plugged) cable entries provided as standard
  • Corrosion resistant powder coated finish
  • Suitable for ambient temperatures from -60ºC to +60ºC (subject to conditions to be discussed with sales engineer)
  • Individually replaceable heating elements

Typical Applications

  • Aircraft hangar service bays
  • Fuel servicing areas
  • Chemical plants
  • Offshore installations
  • Battery stores
  • Gas installations
  • Containers
  • Explosive stores
  • Paint / solvent stores
  • Dusty environments
  • Sugar refineries
  • Firework factories
  • Ammunition depots
GENERAL
Certification ATEX / IECEx    II 2 G/D
Ex d IIC T2 to T4 Gb suitable for Zones 1 and 2
Ex t IIIC T300 to T135°C Db suitable for Zones 21 and 22
CU TR (EAC), KGS (Korea)
Rating 500W to 2kW
Enclosure Mild steel powder coated orange / grey, stainless steel option available to special order
Controls If required, the heaters can be controlled from the EXHEAT range of remote mounted thermostats available for use in hazardous areas
Mounting Pre-drilled support feet supplied as standard; heaters should be mounted horizontally with unrestricted air flow around the unit
Voltage 1 phase: 110 to 120V and 230 to 254V
3 phase: 380 to 440V, subject to design parameters

EXHEAT FWD Flameproof Air Warmers Datasheet

Product Enquiry

  • This field is for validation purposes and should be left unchanged.