CSDM 120/S
COMPRESION KIT
H-DM will always have an extra sealing strip of 5 mm, which is recommended to be placed on the bottom row as shown in the Features & Benefits tab. This will help to hold the blocks from falling down during installation. It could also be installed under the endpacker.
2 x 931 Stayplates & 1 x DM50 Compensation Module are available seperately to complete the Compression Kit
H-DM will always have an extra sealing strip of 5 mm, which is recommended to be placed on the bottom row as shown below.
This will help to hold the blocks from falling down during installation. It could also be installed under the endpacker.
INSTALLATIONS OPTIONS
Option 1 Option 2
Option 1 (recommended): Endpacker and stayplate located in upper end of the frame. DM50 compesation module located on the bottom end, with a stayplate over it (never between module and frame).
Option 2: Endpacker, DM50 compensation module and 2 stayplates located in the upper end of the frame.
Each stayplate should be located in between the rubber components (endpacker-DM50 and DM50-inferior modules).
| KIT DESCRIPTION | ITEM DESCRIPTION | Qty | W [mm] |
H [mm] |
A [mm] |
Weight [kg] |
| CSDM– 120/S Compression Kit | DM – Endpacker | 1 | 120 | 30 | 68 | 0.55 |
| DM50 | 1 | 120 | 5 | 60 | 0.02 | |
| Stayplate | 2 | – | – | – | – |
Hawke H-DM Series DM Endpacker Datasheet
