Duct sealing system FiloSeal+HD is an engineered universal solution for sealing larger heavy cables and pipes in ducts, boreholes or transit frames.
- Up to 2 bar Pressure Resistance
- 100Kg pulling Force on the cables when sealed
- 10xd at 45º, with 1 bar pressure bending test
| SKU |
Product name |
Duct diameter min-max (mm) |
Order unit |
| 280010 |
FiloSeal+HD – 75mm > 110mm |
Ø 110 max. |
per piece |
| 280020 |
FiloSeal+HD – 125mm > 160mm |
Ø 160 max. |
per piece |
| 280030 |
FiloSeal+HD – 180mm |
Ø 180 max. |
per piece |
| 280040 |
FiloSeal+HD – 200mm |
Ø 200 max. |
per piece |
| 280050 |
FiloSeal+HD – 225mm |
Ø 225 max. |
per piece |
| 280060 |
FiloSeal+HD – 250mm |
Ø 250 max |
per piece |
FiloSeal+HD is an engineered solution that provides a strong support system using the hexagonal tubes which builds up like a honeycomb structure. FiloSeal+HD is suitable for sealing any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required
The FILOform duct sealing system FiloSeal+HD uses our MD+ sealant which is easily applied from a standard skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).
After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.
FiloSeal+HD is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses strong, but flexible hexagonal tubes to support the cable and provide a strong backing for the seal
The unique design of the hexagonal tubes makes positioning and separation of the cables very simple while also providing a strong backing for the MD+ to be applied on.
- Flexible, one component, adhesive and sealing compound in a cartridge – (310ml)
- Kits are complete with backing and mastic to fill an empty duct of the quoted kit size
- High levels of Gas and Water tightness
- Excellent adhesion, applicable to all common building materials
- Shows Fire resistance properties
- Resistant against Water, Alkaline, Chemical agents
- Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
- Resistant to Rats
- Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
- Non-corrosive
- Solvent-free
- Shock absorbing
- Non-toxic, neutral and almost odourless
- Also suitable for limiting the EX-zones during transitions (observe chemical resistance)
- Complies with 2011 NEC Articles 225.27, 230.8, 300.5(G), 300.7 (A) on Raceway Seals, and 501.15 (B)(2)
- Suitable for any shaped duct/borehole/opening
- WIMES Compliant (3.02 2013 6.4.3.2 b)
- Quick and easy installation
- A complete kit
- Seals all know materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
- Engineering duct sealing solution
- Suitable for renovations, can be installed retrospectively
- Over 25 years of operational experience
Kits are complete with backing and mastic to fill an empty duct of the quoted kit size.
| Density |
1.2 gr/cm³ |
|
| Pressure |
up to 2 bar |
|
| Pulling Force |
100kg (1000 newtons) |
|
| Bend Test |
10xd at 45º, with 1 bar pressure |
|
| Flow |
< 2mm |
ISO 7390 |
| Colour |
red-brown |
|
| Skin over time (23C/55%RH) |
± 15 minutes |
|
| Curing |
3 mm / 24 hours |
|
| Hardness |
30 shore A |
DIN 53505 |
| Elongation |
100% |
DIN 53504 |
| Tensile strength |
0.8 N/mm² |
DIN 53504 |
| Operating temperature |
+5°C tot +40°C |
|
| Temperature resistance |
-40°C tot +120°C |
|
