Duct sealing system FiloSeal+ is a solution for sealing cables and pipes in ducts or bore holes.
Utility & NEC Compliant: Approved by major UK water authorities (including Thames, Severn Trent, and Scottish Water) and meets NEC Articles 225, 230, and 300 for raceway sealing.
Gas & Water Tight: Provides high-level protection against water pressure and hazardous gases, including Methane and Hydrogen Sulphide.
All-In-One Complete Kit: Supplied with everything required to seal an empty duct of the specified size in a single package.
Versatile & Retrospective: Suitable for any shaped duct, borehole, or opening, and easily installed in both new builds and retrofits.
Chemically Resistant & Safe: Solvent-free, non-toxic, non-corrosive, and resistant to petrol, diesel, ethanol, and LPG.
Duct sealing system FiloSeal+ is a solution for sealing cables and pipes in ducts or bore holes.
FiloSeal+ is suitable for sealing several cables or pipes contained in one duct and also allows re-entry of the seal to add or remove cables or pipes as required.
| SKU | Product name | Duct diameter min-max (mm) | Maximum cable diameter in the duct (mm) | Order unit |
|---|---|---|---|---|
| 282580 | FiloSeal+ 125mm | Ø 125 max. | Ø 95 max. | per piece |
| 282590 | FiloSeal+ 200mm | Ø 200 max. | Ø 160 max. | per piece |
The Filoform duct sealing system FiloSeal+ uses our MD+ sealant which is easily applied from a standard skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).
After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.
FiloSeal+ is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses a uniquely shaped foam piece which positions neatly around the cables or pipes in the duct.
The unique design of the tri-flexible foam makes positioning and separation of the cables very simple while also providing a backing for the MD+ to be applied on.
This seal is easily installed in vertical scenarios while providing the added security of ensuring no loss of components down the duct.
FiloSeal+ is suitable for sealing several cables or pipes contained in one duct and also allows re-entry of the seal to add or remove cables or pipes as required.
| Density | 1.2 gr/cm³ | |
| Flow | < 2mm | ISO 7390 |
| Colour | red-brown | |
| Skin over time (23C/55%RH) | ± 15 minutes | |
| Curing | 3 mm / 24 hours | |
| Hardness | 30 shore A | DIN 53505 |
| Elongation | 100% | DIN 53504 |
| Tensile strength | 0.8 N/mm² | DIN 53504 |
| Operating temperature | +5°C tot +40°C | |
| Temperature resistance | -40°C tot +120°C |
Download Filoseal+ HD Datasheet & Disclaimer
